How to clean the strainer – Panasonic MJ66PR User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HOW TO CLEAN THE STRAINER

1. Fill the Bottle with water and attach the Brush Unit as

shown. Do not use any other brush. Do not use the
Cleaning Brush when there is no water in the Bottle.

2. Place a glass or bowl under the spout and push the

Switch “ON”.

3. Make sure that the Strainer is turning, then open the Lid

and insert the Cleaning Brush.

4. Move the Cleaning Brush back and forth while squirting

water from the Bottle. Be sure to insert the shaft

completely before pulling it back.

Do not switch the power on and off while the Cleaning
Brush is inserted, or the Strainer will be damaged.

5. After removing the Cleaning Brush, push the Switch “OFF.

And unplug the unit.

6. Clean the Brush Unit after each use. Take the Strainer

out after cleaning and rinse it with clean water.

- 5 -

Advertising