Panasonic SC-CH350 - Manual (Page 23)

Memory tuner operation (to listen to broadcast stations preset into memory)
Switch on the power and be sure you've completed the steps of
“Memory presetting” on page 22.
1
2
FM MODE/B.P
■ From the main unit
1 Press the band-select button to select FM, LW
or MW.
Each time you press the band-select button, FM, LW and MW
indicators will alternately appear.
2 Press TUNING to select PRESET.
n o O r r T
I /' i_ _/ i_ I
3 Turn the jog dial to select the desired preset
channel number.
The selected preset channel number will appear on the dis­
play.
r It/f n n /
J’nf QUARTZ J * »
LOCK / / t u u. f LJ
MHi
m STEREO
Channel number
S If noise is excessive in the FM mode
Press FM MODE/B.P to monaural position.
FM MODE/B.P [J ¡\j U
:EP CO TUN b L vp CD*1(
-SKIP^^EutCtl
» II ■ a a a a a
m >
□ □□□□
MUTWO -3lUS - VOiLfME +
D(
■ From the remote control
1 Press TUNER/BAND to select FM, LW or MW.
2 Press the numeric button corresponding to
the preset channel you wish to tune in.
■ Most recent memory
The most recent memory system remembers the broadcast station
last tuned to when you switch the power to standby mode or select
other functions. When you switch the tuner back on, the last tuned
station will be on.
The presets will stay in the memory for approximately 2 weeks,
even if there is an interruption.
You will be in the monaural position when the STEREO indicator
goes out.
The sound will then be heard in monaural. If the broadcast signal is
weak, or if there is a large amount of interference, you will get a
sound using FM MODE/B.P.
23