Overviewf, Installation hardware – Panasonic CY-VM5800U User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ça
®
0
©
00
©
mM
A
wmmm
The installation information is designed for experienced installers and is not intended
for non-technical individuals. It does not contain warnings or cautions of the potential
dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than a qualified
installer could cause damage to the electrical system and could result in serious per
sonal injury or death.
□ Overviewf
This product should be installed by a professional
(Please
refer
to
the
“WARNING”
statement
above )
o Identify and label the car wires
o Connect the car wires to the wires of the power
connector
o Check the operation of the unit
If you encounter problems, please consult your
nearest professional installer
Caution.
oThis unit operates with a 12 V DC negative
ground auto battery system only Do not
attempt to use it in any other system Doing
so could cause serious damage
Before you begin installation, look for the following
Items which are packed with your unit
o Warranty Card
Fill this out promptly
o Panasonic Servicenter List for Service Directory
Keep for future reference in case the unit needs
servicing
o Installation Hardware
Needed for monitor set
ting
□ Installation Hardware
No
Item
Diagram
Q’ty
Connection cord
{Length 3 m)
1
(D
Clamp connector
1
18
№
VM5800U