Panasonic SX-MB100 - Manual (Page 17)

Listen to the FM radio
1
Press the FM TUNER button to turn it on.
• When this button is on, all other operations
such as keyboard performance and CD play­
back are completely disabled.
Use the FM TUNING + and - buttons to select
a station to listen to.
<Display example>
FM 80. 2 MHz
■ Frequency
Lights during a
stereo broadcast
aimo
Lights when a clear signal is received.
■ Press the buttons only briefly to select a sta­
tion. If the buttons are pressed too long, auto
tuning will be activated.
Use the CD/FM TUNER VOLUME buttons to ad­
just the volume {0 to 20).
<Display>
/
CD/FM tuner volume
• After a few seconds, the display returns to the
previous display.
Auto tune
Press and hold the FM TUNING + or - button, and re­
lease it when the frequency begins to change.
• The frequency automatic stops at the first station
that is received.
• If you press the button again, automatic tune stops.
• In some cases when there is signal interference, the
signal scan may stop even though a station signal is
not being received. In this case you can intermit­
tently tap the button to select the next station.
MEMO
• When reception is poor, try to improve it by adjust­
ing the length and direction of the radio antenna.
The radio signal is likely to be strongest if the instru­
ment is situated next to a window.
You can store your favorite frequency settings in the
memory. (Refer to page 26.)
17
QQTG0626