How to check the battery conditions, Connection of antenna – Panasonic WX-RP410 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing the battery case
Insert the Battery Case firmly until the click sound
can be heard.
Battery Check
After installing the battery, set the power switch to
on and the power indicator LED will light. If the
power indicator LED fails to light, it is an indication
that the battery is bad.
Replace the battery with new one.
How to Check the Battery Conditions
The Battery Status Indicator shows the battery condition.
This indicator lights green after turning on the power
when the total voltage of two batteries is more than
approx, 2,0V.
Notes:
1. When this indicator light changes to red from green,
replace the battery within 45 minutes, [at 77°F
(25®C)1
2. When the frequency is changed while the power on,
these indicator lights go off for a moment.
Therefore use this transmitter after confirming the
operation of the battery indicator.
Connection of Antenna
Connect the Antenna (provided) to the Antenna Terminal
{14) on this unit.
Note :
Keep the Antenna connected to the transmitter
when not used to project the connectors.
7 -