Setting the clock to the present time, Clock, Tracking – Panasonic NV-L20 User Manual

Page 12: Iloc, 9 ^ i a, Bbs3, D = d g

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SETTING THE CLOCK TO THE PRESENT TIME

The built-in digital clock employs the 24-hour system.

Q Press the"+’* or"- ” Button to set the date.

□ □ □ □ □ □

FINE/NORMAL

BBS3

TRACKING

For Example: Set the clock for Sunday, October 10,

1999,9:10

•Connect the VTB to the mains outlet.
• Press the VTR On/Off Svwtch to turn the VTR On.

0 When connecting this VTR to the mains or after a long

power failure, the time indications flash.

r

1 0 - Ü Q J

Q Press the Clock Button to start the date and time set­

ting.

D^QO

CLOCK

0

Press the “+" or" - " Button to set the year.

D^DD

□ □

TRACKING

O Press the Next Button.

0 Press the " or " Button to set the month.

D^QD

°

«O-

I I □

TRACKING

0 Press the Next Button.

i l O c

■ 'M''

D = D G

— «

n □

TRACKING

0

Press the Next Button.

0

Press the “+" or “ -" Button to set the hour.

0 Press the Next Button.

0 Press the Clock Button when the present time be­

comes exactly 9:10'00".

10.

9 ^ I a-,

CLOCK

■J

At every push of the Next Button, the flashing indication
changes in the following order.

YEAR-H. MONTHS DATE— HOUR— MINUTE

"" ■ " ' -.............................................................................................................................. - -

• In case of a power failure, the timer back-up system

maintains the clock operation and timer content for |

at least 60 minutes. However, depending on the
charging time and the memory content, the back-up i
time may be considerably longer. However, it takes

more than 60 minutes for the back-up circuit to be­

come operational, after the VTR is connected to the

mains.

•The Timer Record Function should be set to "Off",

otherwise the VTR cannot be operated normally. In
this case, the Timer Record Indicator "0" will flash

to warn you.

• During date setting, the corresponding day is si­

multaneously set.

I

•The clock/timer of the VTR is programmed with the

calendar up to the end of the year 2067.

The indications 88-99 are for the years 1988-1999.
The indications 00-87 are for the years 2000-2087.

1 2

Advertising