Panasonic STEREO RADIO CASSETTE RECORDER RX-FT530 - Manual (Page 10)

Making a Recording
(continued)
Recording from deck 1 to deck 2 B
When PAUSE and mamsiM of deck 2 are pressed, tape
recording starts by pressing the deck 1 playback button.
(Synchro-start function)
1
2
3
4
5
t Vl SELECTOR to TAPE/Saa.
TM-QI MOD PhMt
1_I___ I
Insert the playback tape into
deck 1 and the recording tape
into deck 2.
I j—1 |j ) I Set EDITING to the desired posl-
----- 1' I—- tion.
“NORMAL": Normal speed
“HIGH": High speed
i»p*^sE «13^133 Press PAUSE of deck 2, then
I I I [ press laTOJSiB.
□
Press PLAY of deck 1.
Recording is started by means of the
Synchro-start function.
To stop recording:
Press STOP/EJECT (deck 1 and deck 2).
• Do not change the tape speed during recording. The play­
back sound may flutter.
• Be sure to set SELECTOR to TAPE/ SIg3 during record­
ing. Do not change it to any other position.
• If the unit is brought near a TV set during recording, noise
may be recorded due to the effects of the signals from the
TV set. Maintain a distance of at least 1.5 meters between
the unit and a TV set.
Erasure of tape
When recording, previously recorded signals on the tape
will be erased automatically.
(Make no connections to the |CDl /LINE IN jacks.)
1. Set SELECTOR to /LINE.
2. PresslimwiTB.
Recording from external equipment
1
2
3
4
Connect the output of the external equip­
ment tofcbl /LINE IN jacks. (Refer to page 5.)
Set SELECTOR to ICDI/LINE. and insert the
recording tape into deck 2.
Press PAUSE of deck 2, then pressfsHgilrTil.
Start playing the external equipment (ex.
portable CD player).
Release PAUSE.
10