Cuisinart CSB-44N - Manual (Page 6)

6
Once properly aligned, slide the
blade/disc onto the stem and push
firmly into position. To ensure that
the blade/disc is securely in place,
carefully press the center end of each
attachment back toward the shaft.
It is important to properly secure the
blade/disc to prevent separation during
use. Do not begin operating the hand
blender until the desired blade/disc
is secured!
2. Attach/Detach blender shaft to
motor body.
a. Align blender shaft with motor body
as shown in illustration. Push together
until you feel and hear a click.
b. To detach: Press the release button
and pull the shaft away from the body.
Do not grasp shaft around the blade
or whipping disc.
3. Attach/Detach charger handle
to motor body.
a. After batteries are fully charged,
remove charger handle from wall
socket. Push down on thumb grip
and slide the plug to the retracted
position inside the housing.
b. Press the release button. Align two
slots on bottom of charger with two
tabs on top of motor body. Press
together until you hear a click and
the two sections fit together
without gaps.
c. To detach: Hold motor body firmly
in one hand. Detach charger handle
by pressing release button located at
top of motor body, then pull charger
handle away from motor body by
lifting up with other hand.
Note: Detach the changer handle
from the motor body after
each use.
OPERATION
Turning Cordless Rechargeable Hand Blender ON/OFF:
Keep hands, hair, clothing and other utensils away from blending blade.
Press and hold rubberized ON/OFF button on top of handle to turn
motor ON. The ON/OFF button is marked “PRESS”. The hand
blender will continue to run as long as the switch is pressed in. To turn
hand blender off, release ON/OFF button and the motor will stop.
Helpful Hints:
1. Cut most solid foods into 1/2" cubes for easy blending.
2. Pour liquid ingredients into the mixing container first, unless
recipe instructs otherwise.
3. To avoid splashing, do not pull the hand blender out of the
mixture while blender is running.
4. Do not let hand blender stand in a hot pot on stove while not
in use.
5. To prevent splashing, don't turn the hand blender ON until the
blade is beneath the surface of the mixture.
6. Do not put fruit pits, bones, or other hard material into the
blending mixture, as these are liable to damage the blade.
7. Do not fill mixing containers too full. The level of mixture will
rise when blending, and can overflow.
8. Adding liquids that are warm, not cold, facilitates blending solids
with liquids.
9. For recipes calling for ice, use crushed ice (not whole cubes) for
best results.
Press
release
button to
separate
or attach
2.
3a.
3b.
Push
Thumb
Grip In
Thumb
Grip
CSB-44N IB-4130 8/4/03 7:10 PM Page 6