Clarion PROAUDIO ARX7570Z - Manual (Page 7)

ARX7570z
11
Setting the Z-enhancer
This unit comes with 3 types of sound tone effects
stored in memory. Select the one you prefer.
∗
The factory default setting is “Z-EHCR OFF”.
Each time you press Z-EHCR button 8 , the tone
effect changes in the following order:
“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z-
ENHANCER 3” ➜ “Z-EHCR OFF” ➜ “Z-EN-
HANCER 1”...
• Z-ENHANCER 1 : bass emphasized
• Z-ENHANCER 2 : treble emphasized
• Z-ENHANCER 3 : bass and treble emphasized
• Z-EHCR OFF : no sound effect
Adjusting the tone
Press A-M button # and select the item to ad-
just. Each time you press A-M button # , the item
changes in the following order:
● When the Z-enhancer and tone bypass are off
“T-BYPASS” ➜ “BASS” ➜ “TREBLE” ➜
“BALANCE” ➜ “FADER” ➜ Function mode...
● When Z-enhancer 1, 2 or 3 is set
“Z-EHCR” ➜ “BALANCE” ➜ “FADER” ➜
Function mode...
Setting tone bypass
The tone bypass disables the tone (bass and
treble) functions and cuts the noise generated
when the tone functions are on.
1. Press A-M button # and select “T-BYPASS”.
2. Turning the Rotary knob % clockwise sets the
tone bypass to “YES” (ON); turning it coun-
terclockwise sets the tone bypass to “NO”
(OFF).
∗
The factory default setting is “NO” (OFF).
∗
If the setting is “YES” (ON), the bass and treble
adjustments cannot be made.
3. When the adjustment is complete, press A-M
button # several times until the function mode
is reached.
Note:
• If you set the Z-ENHANCER function to ON (1 to
3), you cannot set the tone bypass.
Basic Operations
Adjusting the bass
1. Press A-M button # and select “BASS”.
2. Turning the Rotary knob % clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
∗
The factory default setting is “0”. (Adjustment
range: –6 to +6)
∗
The bass cannot be adjusted if the tone by-
pass setting is “YES” (ON).
3. When the adjustment is complete, press A-M
button # several times until the function mode
is reached.
Adjusting the treble
1. Press A-M button # and select “TREBLE”.
2. Turning the Rotary knob % clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
∗
The factory default setting is “0”. (Adjustment
range: –6 to +6)
∗
The treble cannot be adjusted if the tone by-
pass setting is “YES” (ON).
3. When the adjustment is complete, press A-M
button # several times until the function mode
is reached.
Adjusting the balance
1. Press A-M button # and select “BALANCE”.
2. Turning the Rotary knob % clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
∗
The factory default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press A-M
button # several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button # and select “FADER”.
2. Turning the Rotary knob % clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
∗
The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press A-M
button # several times until the function mode
is reached.