Capacity of music programmer, External jacks, A. external power source jack (dc 9-12v in) – Yamaha PSR-41 User Manual

Page 9: B. aux out jacks (l & r), C. expression pedal jack, D. headphone jack (below left end of keyboard.), E. midi jacks (in & out), Optional accessories, Ac power adaptor (pa-4/pa-40), Car battery adaptor (ca-1)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

B. Music playback

Now you can simultaneously play back

the memorized accompaniment and
melody for “Greensleeves”.

1. Press the MELODY PLAY button (§)

and CHORD PLAY button

MUSIC PROGRAMMER

a UELODV

RECORC PLAV

2

.

Tap the START button ®, any key on

the keyboard or the INTRO./ENDING
button ® to start playback. The
music you can hear would have been

impossible without the aid of the
Music Programmer.

Notes:

1. The voices and rhythm can be changed if desired. However, it is not recommended to change

from the Waltz rhythm which has a 3/4 measure to a rhythm with a 4/4 measure.

2. Playback can be stopped at any time by pressing the STOP button (ie).

Capacity of Music Programmer

About 100 chord changes and 240 melody notes can be recorded.

If complicated chords are recorded by using Fingered Chord, the chord
recording capacity will be reduced.
If the number of chords or melody notes exceeds the memory capacity,
recording will stop automatically.

8

External jacks

Several jacks are provided at the back of
the keyboard for connecting a variety of
optional accessories. There is also a
headphone jack at the front.

IgTWWW

R

L +—

EXP. PEDAL AUX OUT DC(9-12V)IN

A. External power source jack (DC 9-12V IN)

• AC power

Connect the optional AC Power Adaptor PA-4/PA-40 to the DC 9-12V IN jack.

Car battery

The Car Battery Adaptor CA-1 plugs into the DC 9-12V IN jack and a
cigarette lighter socket.

B. Aux Out Jacks (L & R)

You can channel sound through your stereo system using these jacks.
Use the optional connecting cord PSC-3.
• Impedance: 600Q
• Cutput level: -7±3dBm (7 notes sounding simultaneously at maximum

volume with Jazz Crgan voice)

Woie:
These jacks were designed to accommodate the most commonly used impedances. Significant
deviation from these specifications will result in inadequate drive, distortion, noise, and poor

performance In general.

C. Expression pedal jack

The EXP.PEDAL jack is for connecting the Expression Pedal EP-1, which

lets you control the overall volume level using your foot.

D. Headphone Jack (Below left end of keyboard.)

Connect a set of headphones to this jack and you can practice without
disturbing others.

E. MIDI Jacks (IN & OUT)

Refer to page 15 for details concerning MIDI.

9

Optional accessories

AC Power Adaptor (PA-4/PA-40)
Transforms AC voltage to DC voltage.
Car Battery Adaptor (CA-1)

Enables you to provide power to the instrument from a car battery using

the cigarette lighter socket.
Soft Carrying Case (SCC-12)
For convenient transportation.
Headphones (HPE-3/5)
Specially designed lightweight dynamic headphones with extra-soft ear pads.
Connecting Cable (PSC-3)
For connecting the keyboard to a stereo hi-fi system or cassette tape deck.
Keyboard Stand (L-2/4)
Expression Pedal (EP-1)
Lets you add more feeling to music by enabling subtle control of the

overall volume level.

Bench (BC-6)

Some optional accessories may not be available in every region.

1^

Advertising