Yamaha disklavier Mark II XG Series - Manual (Page 5)

Important
Read the following before operating the Disklavier.
Warnings
• Do not locate the Disklavier in a place subject to excessive heat, low temperatures, or direct
sunlight. This could be a fire hazard and may damage the finish and internal paits.
• Excessive humidity or dust can lead to fire or electric shock.
• Connect the plug on the Disklavier power cable to a compatible AC outlet. Failure to do so will
present a fire and electric shock hazard. If the power cable plug is not compatible with your AC
outlet, consult your dealer.
• Do not plug several devices into the same AC outlet. This can overload the AC outlet, and lead to
fire and electric shock hiizai'd. It may also affect the performance of some devices.
• Do not place heavy objects on the power cable. A damaged power cable is a potential fire and
electric shock hazard. If the power cable runs under a carpet, make sure heavy objects, including
the Disklavier, are not placed on top of the cable.
• If the power cable is damaged (i.e. cut or a bcire wire is exposed), ask your dealer for a replacement.
Using the Disklavier in this condition is a fire and shock hazard.
• When disconnecting the power cable from an AC outlet, always pull from the plug. Never pull the
cable. Damaging the cable in this way is a potential fire and electric shock hazard.
• The cover of the unit should be removed only by qualified service technicians.
• Do not place liquid containers such as vases, potted plants, glasses, cosmetic bottles, medicines, etc.,
on top of the Disklavier.
• Do not try to modify the Disklavier, as this could lead to fire or electric shock hazard.
• When moving the Disklavier to another location, turn off the power, remove the power plug Irom
the AC outlet, and remove all cables connected to external devices.
Cautions
• Turn off all audio devices when connecting to the Disklavier. Refer to the user’s guide for each
device. Use the correct cables and connect as specified.
• Set the volume level on all the devices to minimum before applying power.
• Do not play the Disklavier at a high volume for extended periods; you may damage your hearing.
This is especially important when using headphones. If you think your hearing ability is impaired,
consult your doctor.
• If the Disklavier is worked extremely hai'd - that is, prolonged playback of veiy “busy” songs - the
Disklavier’s thermal relay may trip. The thermal relay will automatically reset when the Disklavier
has cooled down.
• If you notice any abnormality - such as smoke, odor, or noise - turn off the Disklavier immediately,
and remove the power plug from the AC outlet. Consult your dealer for repair.
• If a foreign object or water gets inside the Disklavier turn it off immediately, and remove the power
plug from the AC outlet. Consult your dealer.
• If you plan not to use the Disklavier for a long period of time (such as when you are on vacation),
disconnect the electrical mains.