Clark Synthesis TACTILE SOUND TA0.1 - Manual (Page 5)

TA0.1 Amplifier 5 www.clarksynthesis.com
PRODUCT INTRODUCTION
OVERVIEW OF THE AMPLIFIER
The TA0.1 amplifier is designed exclusively for use with Clark Synthesis transducers. This amplifier
incorporates the latest digital technology and provides features not available on many amplifiers. Please read
this manual in its entirety so you can get the maximum enjoyment from your Clark Synthesis product(s).
USING THIS AMPLIFIER WITH A CLARK SYNTHESIS TRANSDUCER
The TA0.1 amplifier works with all Clark Synthesis transducers. This manual outlines how to use this amplifier
with our transducers.
CAUTION: This amplifier is designed to provide power to one (1) transducer.
Please note, the TA0.1 can provide more continuous power than the transducer can handle. Why do we
do this? Special effects audio signals often contain peaks that require extra power to be delivered to the
transducer. This amplifier will supply those peaks without damaging the transducer, providing you, the user,
with a true Tactile Sound experience.
FEATURES
The Clark Synthesis TA0.1 Amplifier has the following features:
Class D design for powerful, clean sound •
All-metal cabinet with pre-drilled holes in mounting plate and remote control interface box. •
Crisp, clean, and compact body design •
Wired remote control for “in-chair” adjustments •
Built-in Crossover Control that enables control of the cutoff point from • 40 Hz to 400 Hz
Bypass control that disables the Crossover Control, allowing the amplifier to reproduce full-frequency audio •
Front LED that indicates the amplifier is connected to AC power •
• Auto/On saves power by turning the amplifier stage on only when an audio signal is present
Powered • loop-through allows you to connect multiple amplifiers together to a single audio source
Stereo inputs allow you to connect the amplifier to multiple sources. The audio is automatically combined •
inside the amplifier.
IEC-601 • Connector allows you to use a power cord other than the power cord supplied. This is especially
helpful if you live in a country that requires a different AC plug.
Amplifier automatically runs on AC power from 100 to 240 VAC, 50/60 Hz •
The audio input section works with high-level and low-level line signals. This feature permits the amplifier •
to work with studio-level and consumer-level audio signals
• 5-way binding posts for connecting the transducer wires
!