Yamaha MC1602 - Manual (Page 16)

INPUT CHARACTERISTICS
INPUT
INPUT
IMPEDANCE
SOURCE
IMPEDANCE
SENSITIVITY**
INPUT LEVELS
CONNECTOR
T ype RATED LEVEL
MAXIMUM
NON CLIPPING
LEVEL
PAD GAIN
CH INPUT
OFF(OdB)
-60dB
LO-Z 4k ohms
Hl-Z 10k ohms
50 ~600 ohms
Microphones
or
600 ohms Lines
-80dB (O.OSmV) -60dB (0.8mV) -34dB (15.5mV)
XLR-3-31 type
(Balanced)
and
Phone Jack (TRS)
(Balanced)
-20dB
-40dB (7.75mV) -20dB (77.5mV) +6dB (1.55V)
ON{20dB) -20dB (77.5mV) OdB (775mV) +26dB (15.5V)
INPUT CH INSERT IN 10k ohms 600 ohms Lines -26dB (38.8mV) -6dB (388mV) +20dB (7.75V)
Phone Jack (TRS)
(Unbalanced)
ST SUB IN.AUX SUB IN 10k ohms 600 ohms Lines -6dB (388mV) +4dB (1.23V) +20dB (7.75V)
Phone Jack
(Unbalanced)
AUX RTN 1 0 k ohms 600 ohms Lines -16dB (123mV) +4dB (1.23V) -
Phone Jack
(Unbalanced)
TALKBACK IN 4k ohms
50 ~ 600 ohms
Microphones
-70dB (0.25mV) -50dB (2.45mV) -24dB (48.9mV)
XLR-3-31 type
(Unbalanced)
■ OUTPUT CHARACTERISTICS
OUTPUT
OUTPUT
IMPEDANCE
LOAD IMPEDANCE
OUTPUT LEVELS
CONNECTOR TYPE
RATED LEVEL
MAXIMUM NON­
CLIPPING LEVEL
STOUT 150 ohms 600 ohms Lines +4dB (1.23V) +24dB (12.3V)
XLR-3-32type
(Balanced)
AUX SEND 1 ~3 150 ohms 600 ohms Lines -H4dB (1.23V) +20dB (7.75V)
Phone Jack
(Unbalanced)
INPUT CH INSERT OUT 600 ohms 10k ohms Lines -6dB (388mV) -l-20dB (7.75V)
Phone Jack (TRS)
(Unbalanced)
PHONES 100 ohms
8 ohms Phones ImW 20mW
Stereo Phone Jack
(Unbalanced) 40 ohms Phones 3mW 130mW
** Input level required to produce rated +4dB output level.
• OdB = 0.775Vr.m,s.
SERVICE
This product is supported by Yamaha’s worldwide network of
factory trained and qualified dealer service personnel. In the event
of a problem, contact your nearest Yamaha dealer.
15