Panasonic OMNIVISION VHS PV-V4521 - Manual (Page 19)

Audio Mode for Recording
1
Press SAP/ Hi-Fi
to display audio mode.
(Display disappears after 5 seconds.)
2
»STEREO
»SAP
<
MONO
Arrow indicates
selection.
Press SAP/ Hi-Fi
repeatedly
to select
desired mode.
Refer to “Receivable
Broadcast Types”
on page 18.
3
Do a recording.
See page 13.
Audio Mode for Playback
1
Start playback.
See page 12.
2
3
Press SAP/Hi-Fi
to display audio mode.
(Display disappears after 5 seconds.)
HIFI(L/H)^
HIFI (L)
HIFI(R)
NORMAL
Arrow indicates
selection.
o
Ô O O C D
Ô O O C D
S o ® ©
uccf um.T
OCE)® O
mmo tfUMCM
O
Q O O ®
SAP/
Hi-Fi
Press SAP/ Hi-Fi
repeatedly
to select
desired mode.
•Select “HIFI(L/R)”or
“HIFI(D” or “HIFI(R)” to
listen to stereo
recordings in stereo
sound. Select
“NORMAL” for
monaural sound.
Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected
to a stereo TV or an external stereo amp and speakers. (See page 18.)
If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
Hi-Fi and normal audio playback volume level may differ.
19