Optional equipment connections, Vcr connection, Viewing a video – Panasonic PT 51SX60 User Manual

Page 6: Procedure, Recording a television program procedure

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

/NSTALLATION

Optional Equipment Connections

VCR Connection

Follow this diagram when connecting your television to a VCR only. The S-VIDEO connection

provides higher quality picture. It overrides other VIDEO connections. Use INPUT 1 or 2, AUDIO R

and L with S-VIDEO connection.

VCR

S-VIDEO OLTT

^ •-

AUDIO OUT

# R

ANTOUTPin' I

IcTFlJ«

I-

CABLES NOT SUPPLIED jj^ ^

^

TERMINALS ON BACK OF TV

CENTER CHANNEL INPUT

120 SOW (DIN) MAX

@

@ I

VIDEO 5-VIDE'

Use

either

the

S-Video or Video

connection.

i

INPUT 2

TO AUDIO AMP

PROG.

OUT

Incoming Cable

Wore; The remote control must be programmed with supplied codes to operate the VCR. See

Programming the Remote Control in the Remote Control Quick Reference Guide.

Viewing a television program

Procedure

1. Select ANTI in the SET UP menu under Prog Chan (Program Channels).

2. Tune the television to the television program you want to view.

Viewing a video

Procedure

Option A

1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).

2.

Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,

VIDEO 2, etc.) connected to your VCR.

3.

Begin the video,

a Option B

1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).

2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.

Recording a television program
Procedure

O Option A (Recording and viewing the same program)

1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).

2. Tune the television to Channel 3 or 4, depending on your VCR.

3. Using the VCR, tune to the television program you want to record.

4.

Begin recording.

Option B (Recording one program while viewing another program)

1. Select ANT 1 in the SET UP menu under Prog Chan (Program Channels).

Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,

VIDEO 2, etc.) connected to your VCR.

Using the VCR, tune to the television program you want to record.
Begin recording.
Press the TV/ViDEO button on the remote control to switch back to TV mode.

Tune the television to the television program you want to view.

2.

3.
4.

5.

6

.

<9

Advertising