Final installation, Final checks – Panasonic CQ3700EU User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Battery
Connect the yellow battery lead to the correct radio
wire or to the battery fuse port on the fuse block.
Antenna
Connect the antenna by plugging the antenna lead
into the antenna receptacle.
□ Final Installation
Lead Connections
Connect all wires, making sure that each connec
tion is insulated and secure. Bundle all loose wires
and fasten them with tape so they won't fall down
later. Now insert the stereo unit into the mounting
collar.
Equipment
Connect any optional equipment such as amplifier,
according to the instructions furnished with the
equipment. Keep about 12 inches (30 cm) of dis
tance between the speaker cords/amplifier unit and
the antenna/antenna extension cord. Bead the
operating and installation instructions for any equip
ment you will connect to this unit.
Accessory (ACC) Power
Connect the red power lead to the correct vehicle
radio wire or to the appropriate fuse port on the fuse
block.
If the stereo unit functions properly with all these
connections made, disconnect the wires and pro
ceed to the final installation.
Congratulations! After making a few final checks,
you’re ready to enjoy your new auto stereo system.
□ Final Checks
1. Make sure that all wires are property connect
ed and insulated.
2. Make sure that the stereo unit is securely held
in the mounting collar.
3. Turn on the ignition to check the unit for prop
er operation.
If you have difficulties, consult your nearest autho
rized professional installer for assistance.
CQ-3700EU
17