Panasonic NI-33GX User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FABRIC IRONING CHART
NOTES:1. Check garment for specific ironing instructions. Always follow
manufacturer's instructions.
2. Iron blended fabrics at setting for lower-temperature fiber or for the
highest-percentage fiber.
3. Use caution, some synthetics may melt at high temperature. .
Temperature
Selector Setting
Fabric
Ironing Recommendations
1
ACRYLIC
♦ ACRILAN
♦CRESLAN
♦ ORLON
ACETATE
METALLICS
SUEDE
Dry iron on wrong side, or use a press cloth on
. top of fabric Don't sprinkle water directly on
. fabric to avoid spots.
To iron suede, cover ironing board with brown
paper and use it as a press cloth.
2
NYLON
♦ANTORON
♦CAPROLAN
SILK
Dry iron on wrong side.
3
PERM. PRESS
RAYONS
POLYESTER
♦ DACRON
♦FORTREL
♦KODEL
TRIACETATE
♦ ARNEL
W’n W COTTON
Dry iron on wrong side. To touch-up collars,
cuffs, pockets, etc., iron lightly on right side.
4
WOOL
VELVET
Steam ironing is suggested. Never iron
completely dry. To iron velvet, steam iron
holding the iron slightly above the fabric.
5
COTTON
,, Steam ironing is suggested. Sprinkle water on
the fabric, depending on its thickness. Iron dark
fabrics on wrong side to avoid unwanted sheen.
6
LINEN
Steam ironing is suggested. Iron dark fabrics on
wrong side to avoid unwanted sheen.
♦ Trademarks of Fiber Manufacturers.
-
9
-