Operating precautions, Handling, Operating precautions handling – Panasonic LF-D102U User Manual

Page 7: Maintenance

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OPERATING PRECAUTIONS

Handling

When operating the DVD-RAM drive

• Do not instaii on a sheif or other high place.
• Do not touch the DVD-RAM drive or its cable connector area. {Doing so may cause it to maifunction.)
• The DVD-RAM drive can be installed horizontally or vertically.
• Do not move the DVD-RAM drive during operation. (Doing so may damage the equipment.)
• Do not leave the tray out. (Doing so will allow dust to get inside the DVD-RAM drive and may damage it.)

• Only load DVD-RAM discs, PD cartridges, and designated 12 cm discs in the tray. (Loading other types of discs or other

media may damage the drive.)

• Do not open or close the tray while pressing on the shutter (doing so may damage the DVD-RAM drive).
• Do not force the shutter open (doing so may damage the DVD-RAM drive).
• Do not bring magnets or magnetic objects near the DVD-RAM drive. (Operation may become unstable due to the effects of

the magnetism.)

• Do not use the DVD-RAM drive when condensation has formed in or on it.

[When the DVD-RAM drive is suddenly taken from a cold place to a warm location, droplets of water(condensation) will

form, causing the drive to malfunction. In such cases, remove the disc and leave the DVD-RAM drive standing for about an

hour before proceeding with operation.]

• Do not expose the DVD-RAM drive to the sprays from volatile insecticides, etc. (Doing so may deform the external cabinet

or cause the paint to peel off.)

• If the DVD-RAM drive is used near a radio or TV set and it causes interference with reception, place it at least 6'6 "

(2 meters) away from the set or use a main outlet which does not share power with the set.

When moving or transporting the DVD-RAM drive

• Before moving the DVD-RAM drive , remove all media, turn off the DVD-RAM drive , and disconnect the AC

power supply cord.

• Repackage the DVD-RAM drive in its packaging before shipping it.
• Ensure the DVD-RAM drive is not dropped or hit during shipment.

Maintenance

Maintaining the DVD-RAM drive's panel surfaces

• Turn the DVD-RAM drive off and unplug the

AC power supply

cord from the

household AC outlet.

• Gently wipe off the dirt using a soft dry cloth.
• To remove stubborn dirt, soak the cloth in some diluted kitchen neutral detergent, wring it out well, and then wipe clean.
• Observe any applicable precautions when using chemical cleaning cloths.
• Do not use benzine, paint thinners or other solvents.

Maintaining the lens and discs

• Dust, dirt, etc. will adhere to the DVD-RAM drive’s lens, DVD-RAM media, PD cartridges, CD-ROMs, CDs and DVD discs

over a prolonged period of use, possibly making it impossible for data to be read and/or written properly.
Although the exact period will differ according to the operating environment and number of times the DVD-RAM drive is
used, Panasonic recommends that maintenance be performed using the cleaners available as optional accessories once
every one to four months.

To maintain the DVD-RAM drive's lens

• Obtain the PD Lens Cleaner (model number: LF-K123LCA). Although this cleaner is for PD/CD-ROM drive, this can be

used with this DVD-RAM drive, too.

To maintain the media

• Obtain the DVD-RAM/PD Disc Cleaner (model number: LF-K200DCA).

Advertising