Panasonic 7 - Manual (Page 82)

82 Chapter 4 Configuring user tunnels
1 Choose Services > Available.
2 Select the tunnel type.
3 Select the Management Protocol for the Nortel VPN Router’s private
interface.
4 Use the RADIUS check boxes to permit RADIUS requests on the public and
private interfaces of the Nortel VPN Router. If you enable RADIUS traffic,
you must also enable RADIUS on the Services > RADIUS window.
Configuring the Nortel VPN Router tunneling protocol settings is dependent on
the tunnel type.
• For IPsec, choose Services > IPsec and select the required authentication,
encryption, and authentication order.
• For PPTP, choose Services > PPTP and select the required authentication and
authentication order.
• For L2TP, choose Services > L2TP and select the required authentication and
authentication order and configure required L2TP access concentrators.
• For L2F, choose Services > L2F and select the required authentication and
authentication order, and configure required network access servers.
To add a user group:
1 Go to Profiles > Groups and click on Add.
2 Enter a group name of up to 64 characters (spaces are permitted).
For example, you could use Research and Development. The new group is a
child of the selected parent group. Therefore, the new group initially inherits
the parent group’s network access attributes, including authentication, tunnel
types, filtering, and priorities. When created, these inherited options can be
overwritten for the new group.
3 Click Apply and OK to add the group name.
To add a user profile in a group:
1 Go to Profiles > Users and select a group to which you want to add users
from among those in the Group list. If you need to add a new group, select
Profiles > Groups.
NN46110-500