Panasonic AG-527D - Manual (Page 25)

With the proper audio mode setting,
your Combination VCR can:
• record and playback an MTS stereo broadcast
{main ianguage) in stereo Hi-Fi.
Stereo sound is recorded on the ieft and right
audio tracks and on the video portion of a tape.
• record and playback a monaural broadcast
(main language) or an SAP (Secondary Audio
Program, usually in a second language) on the
Hi-Fi tracks for better quality monaural sound.
• playback non-Hi-Fi tapes in monaural.
AUDIO
Select Audio Mode for Playback
Select the type of sound track you desire for playback.
® Playback the tape.
See the “Playback a Tape” section on page 16.
Push AUDIO repeatedly (each
push within 5 seconds) to select
^ the desired audio mode
(HIFI/NORMAL).
Please select HIFI to listen to your stereo
recordings with stereo sound or NORMAL for
monaural sound.
< Example >
Push
AUDIO
Push
'AUDIO
This screen appears when you push AUDIO
during playback.
Select Audio Mode for Recording
Select the type of broadcast and sound track you wish to record.
Do the operation of “Select Audio Mode
for TV Viewing” section on previous
page.
• Your recording is always performed according to the
audio mode you selected in the “Select Audio Mode
for TV Viewing" section on previous page.
0,
Do a recording.
See the “Record On a Tape”
section on page 18.
When purchasing or renting prerecorded tapes, remember that only those recorded in Hi-Fi stereo will play back with true
stereo sound. Standard stereo tapes will play back with monaural sound.
In order to listen to Hi-Fi stereo playback, the Combination VCR AUDIO (L/R) jacks must be connected to a
stereo amp and speakers.
There may be a difference in audio level between Hi-Fi and norma! audio playback.
25