Pip operation with a vcr and cable box, Procedure, Picture in picture (pip) operation – Panasonic CT-2771S User Manual
Page 7: Pip) o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
icture
I
n
P
icture
(PiP) O
peration
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature. A second video
source (VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown. (Some models
have only one video input and some models have an S-VIDEO video input.)
TERMINALS ON BACK OR TV
VCR
CABLE BOX
Note:
The Remote Control must be programmed with supplied codes to
operate the VCR and Cable Box. See Programming the Remote
Control in the Remote Confra/ Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
•
Press the TVA/IDEO button on the Remote Control to select
the video PIP source.
Verify the CABLE BOX and VCR are ON and the VCR is
tuned to channel 3.
•
Choose channels for the PIP frame by pressing the CBL
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
•
Choose channels for the Main Picture by pressing the TV
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for on
screen PIP and Main Picture source status.