Cqil ii£jij l^iq, To pause recording, To stop recording – Panasonic DMR-T3040 User Manual

Page 19: Гтта, Recording/dubbing/transferring of a program, Recording limit, Ensure [dvd, tv] is switched to “dvd” and press, Ch] to select the channel, Press [rec mode] to select the record­ ing mode, Press [#, rec] to start recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CQil ii£jij l^iQ

Subsequent to page 20, reference is made to steps 1-3 only

where necessary.

1

2

Press [c!)j DVD POWER] to turn the
unit on.

Press [HDD] or [DVD] to select the
recording drive

(-►Drive, page 65).

The HDD or DVD button lights up on the unit.

1^^

• It is not possible to record to both HDD (Hard Disk Drive)

and DVD drive simultaneously.

If you selected the DVD drive

Press [A, OPEN/CLOSE] to open the

tray and insert a disc.

• Press the button again to close the tray.
• It is not possible to record continuously from one side of a

double sided disc to the other. You will need to eject the disc
and turn it over.

• If you put a disc in while the HDD is selected, the DVD but­

ton on the unit will flash while the unit reads the disc.

Ensure [DVD, TV] is switched to
“DVD” and press

[

a

v

,

CH] to select

the channel.

e,g.,when you select

channel 4

e.g.,when you select "XP”

Press [REC MODE]

to select the record­

ing mode.

Select "XP”, “SP", “LP”, or “EP" (-► right).

• To record sound using LPCM (possible only in XP mode):

Select “LPCM" in “Audio Mode for XP Recording" (the pic­
ture quality may go down slightly), (-»page 61)

Press [#, REC] to start recording.

The HDD or DVD record lamp oh the main unit lights up.

dvd

-

fam

XP

П-Л n n t

U LI U.U I

Program information (e.g., time and date) is registered in the

program list (-►page 26).
• To enable playback your DVD-R on compatible equipment, it

is necessary to finalize it (-►page 38).

To pause recording

Press [II]. Press again to restart recording.

To stop recording

Press [■].

You can record while the unit is on standby for timer recording,
but once the time for the timer recording to begin is reached,
any recording taking place will stop and the timer recording will

begin.

гтта

• Recording will take place on open space in the HDD or on disc.

Data will not be overwritten.

• It is possible to watch playback from one drive while recording

from another (editing is not possible).

• if

there is no space left on the recording

drive, you will need to

erase unwanted

programs (in the case of HDD and DVD-RAM) or

use a new disc (^ “Erase Program”, page 40).

• You cannot change the channel or recording mode during record­

ing. You can change them while recording is paused, but the mate­
rial is recorded as a separate program.

• You can record up to 250 programs on HDD, 99 on one disc.

(1 program may be recorded continuously for a maximum of 6 hours).

• When using a DVD-RAM for the first time with this unit, format it to

ensure accurate recording (’♦“Format”, page 38).

»There are limitations when recording to DVD-R (-►page 8).
► When recording MTS sound onto DVD-R or recording using

LPCM, only one of either the main channel or the sub channel can
be recorded. Select at “Select MTS for DVD-R or LPCM"
(-►page 61).

Notes on recording

Recording modes and approximate recording

times in hours

Storage Media

DVD-RAM

Mode

HDD

(40 GB)

Single­

sided

(4.7 GB)

Double-

sided

(9.4 GB)

DVD-R

(4.7 GB)

XP (High quality)

8.5

1

2

1

SP (Normal)

17

2

4

2

LP (Long play)

34

4

8

4

EP (Extra long play)

52

6

12

6

• FR (Flexible Recording Mode)

can be set when using timer

recording or when dubbing.

-When carrying out timer recording or flexible recording to

HDD.

FR automatically adjusts the recording mode to enable the pro­

gram to fit exactly into the space of an unused DVD-RAM/R (4.7
GB).

-When carrying out timer recording or flexible recording to

DVD-RAM/R.

FR compares the length of the program to be recorded with the

available space on the disc. Based on this, it automatically
selects the recording mode that will fit the program most accu­

rately into the remaining space while maintaining the best possi­
ble picture quality. For example, when recording a 90-minute
program onto a new DVD-RAM disc, FR automatically selects a
recording rate between “XP” and “SP”.

-When dubbing

The unit automatically adjusts the recording mode during dub­
bing so that the program fits into the space available while main­
taining as closely as possible the original picture quality.

• If there are still pictures stored in the selected drive, recording

times may vary from those given in the table above.

■ Recording/Dubbing/Transferring of a program

This unit incorporates copyright protection technology for recording

equipment known as CPRM (-►page 65). With some programs
recording, dubbing and/or transferring may not be possible.

Recording limit

No recording limit

Usable Media

Ш:]

оизз
шш

ШШ

Пьвф i!Tt!il

Recording limited

to one time

Recording

not possible

ШШ

[щф

X"™'

nitiii

СЕИ^

You cannot record on DVD-R.

You cannot record/dub

on any media.

^ Can be dubbed to HDD but cannot be played back.

Transfer:

this is when a program is moved to another storage

media. The original program will be erased.

o>

c

t

о

u

tc

RQT6637

Advertising