Clock setting, Power & time setting – Panasonic MICROWACE OVEN NN-S560 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Clock Setting

You can use the oven without setting the clock.

Example: To set 11:25 a.m. or p.m.

1.

Clock

* Press once.

►Colon will blink.

2.

□00

• Enter time of day using

the number pads.
►Time appears on the

Display Window;

colon IS blinking.

3.

Cfocic

• Press.

►Colon stops blinking:

time of day is entered
and locked onto the

Display Window.

NOTES:

1.

To reset time of day, repeat steps 1- 3.

2,

The clock will keep the time of day as long as

oven is plugged in and electricity is supplied.

S.CIock is a 12 hour display.

4.0ven will not operate while colon is blinking.

To Use Popcorn Pad

Example: To heat 1.75 oz. of Popcorn

1.

Popcorn

Press once

• Set the desired weight

of prepackaged

microwave popcorn.

Press

Weight

once

twice

3 times
4 times
5 times

1.75 oz. (50g)

2.65 oz. (75g)
2.85 oz. (80g)
3.0 oz. (90g)
3.5 oz. (99q)

2.

• Press

Start

Pad.

►Cooking time appears

in the display and
begins to count down.

S/art

NOTES ON POPCORN PAD:

1. Use prepackaged

room temperature

microwave popcorn. Read manufacturers'
instructions.

2. Place bag in oven according to manufac­

turers' directions.

3. Pop only one bag at a time.
4. After popping, aliow the contents of the

bag to cool for a few minutes before
opening. Open bag carefully away from

face and body because popcorn and

steam are extremely hot.

5. Do not reheat unpopped kernels or reuse bag.
6.

NEVER

leave oven unattended when

popping popcorn.

REMARK:

When popping multiple bags one

right after the other, the cooking times may

vary slightly. This does not affect hte pop­
corn results.

CAUTION:

If pre-packaged popcorn is a dif­

ferent weight than is recommended, do not

use the popcorn setting, or inadequate pop-

K

or a fire may occur. Follow the manu-

jrers' instructions.

Power & Time Setting

How do I program Power and Time?

Example:

To cook at P 6 (MEDIUM) Power

for 1 minute 30 seconds

1.

( Pow^r L&V9i

\

• Select

Power Level.

(according to the

chart below)

Press 5 times.

2.

• Set Cooking Time

□ □□

using number pads.

3.

• Press.

S/arf

►Cooking will start. The

time on the screen
will count down.

Press

Power Level

once

PIO (HIGH)

twice

P9

3 times

P8

4 times

P7 (MEDIUM-HIGH)

5 times

P 6 (MEDIUM)

6 times

P5

7 times

P 4

8 times

P 3 (MEDIUM-LOW)

9 times

P2

10 times

P 1 (LOW)

NOTES:

1 .For more than one stage cooking, repeat

steps 1 and 2 for each stage of cooking

before pressing

Start

Pad.

2. When selecting P10 (HIGH) power for the

first stage, you may begin at step 2.

3. Two beeps will sound between each stage

of programming. Five beeps will sound at
the end of the enrire sequence.

4. When selecting P10 (HIGH) power, the

maximum programmable time is 30 min­
utes.
For other power levels, the maximum time

is 99 minutes and 99 seconds.

5. For reheating, use P10 (HIGH) for liquids,

P7 (MEDIUM-HIGH) for most foods and
P6 (MEDIUM) for dense foods.

6. For defrosting, use P3 (MEDIUM-LOW).

Advertising