Panasonic SL-SX340 - Manual (Page 4)

Other Play Methods
The letters such as Q in the various illustrations refer to the descriptions in the “Location of Controis” section (see page 2).
Skip play
The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
1
Select the desired track.
o
changing the sound quality
Press during play or stop mode.
EQ
e
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS^TRAIN
t ___
^Cancel (no indicator is shown)
_____ ^____J
S-XBS:
Select this setting to boost the low frequency range re­
sponse.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your earphones while riding on the train,
or to reduce fatigue when listening for a long period of
time.
The setting returns to S-XBS when you disconnect the
power source.
Anti-Skip System
This system deals with skipping in a variety
of ways:
•An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
•A recovery system immediately returns the laser pick­
up to its original position if it is knocked off the track by
a strong shock.
•An anti skip memory (max. 48 seconds) fills in inter­
ruptions caused by bumps and vibrations.
The anti-skip system works automatically while the
system is on and cannot be canceled.
B
Program play
up to 24 tracks can be entered in the programmed
quence.
Preparation: Put unit in stop mode.
1 Select the desired track.
©
2
Register in sequence.
(The indication "M" and the programmed
quence appear on the display.)
MEMORY/RECALL
©
Repeat steps 1 and 2 to program all
the desired tracks.
o
To program the same track in the se­
quence more than once
After step 2, press [MEMORY/RECALL] desired
number of times.
If “ f ” is displayed
No more tracks can be programmed.
To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing.
(The numbers of the programmed tracks appear on
the display in sequence.)
To delete the entire programmed se­
quence
Press [■].
When bumps continue repeatedly
The elapsed playing time disappears and sound is inter­
rupted.
Repeat play/Random play
Press during play or stop mode.
MODE
o
The setting switches in the sequence indicated below
each time [MODE] is pressed.
1 -track repeat (1 CD ) <-----------
One track is repeated.
All-track repeat ( C D )
All the tracks on the disc are repeated.
Random (RANDOM)
The tracks play once each in random
order and then play stops.
Random repeat (RANDOM c!l 3
The tracks play repeatedly in random
order.
Cancel (no indicator is shown)
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 M)<-------
One track is repeated.
Memory repeat (M)
The programmed tracks are repeated.
Cancel (M)
►You can select the first track to play in random play
and random repeat play by pressing [►►!] while the
disc is stopped. All the tracks are played.
►You cannot select random play or random repeat play
during program play.
►The resume function does not work when random or
random repeat are on.
►The mode is canceled when you disconnect the power
source.
The repeat and random play modes are canceled after
steps 1 and 2.
•While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
•The anti-skip memory compresses digital signals.
RQT6335