Panasonic SC-DK2 - Manual (Page 56)

Numbered-
buttons
Si©: I
'Xh IQ-------RETURN
DVD/CD
1
1
(For U.S.A., Australia and New Zealand)
ACTION
Hitlim . MUTING
i"
(For others)
___ SETUP
Kiliail I MUTING
"T
© t lXso Languages V :
/ ©
2
Ratings LeveiSiT
: 3 Menu Language
ESa 4 On-Screen Messages
Engilsh
5 TV Aspect 4:3
: ^ S Speaker Setting
9 Other Settings
Press RETURN to exit
___________ /
initial settings
Remote control only
Once the initial settings have been completed, the unit can aiways
be operated under the same conditions.
Preparation;
Press [DVD/CD] to select disc as the source.
The unit comes on automatically.
1
While the disc is stopped
(For U.S.A., Australia and New Zealand)
Press [SHIFT] + [ACTION],
(For others)
Press [SHIFT] + [SETUP],
The initial settings menu is displayed.
2
Press the cursor buttons [A] or [▼]
to highlight the item, and press
[ENTER],
3
Press the cursor buttons (◄, ►, ▼)
to select the item, and press
[ENTER],
Repeat step 3 as the menus require to make the changes.
Steps 2 and 3 can also be done with the numbered buttons.
Press the number next to the required item.
For example, press [3] to select “3 Menu Language”.
0 1 Disc Languages
.' © 2 Ratings Level Srf'
fflS .3 Menu L a r i g u e g f e . : .
■; ™ 4 On-Screen Messages
English
5 TV Aspect
. ^ S Speaker Setting
4:3
9 Other Settings
Press RETURN to exit
To return to the previous screen
Press [RETURN].
To exit the initial settings menu
(For U.S.A., Australia and New Zealand)
Press [SHIFT] + [ACTION].
(For others)
Press [SHIFT] + [SETUP].
• The initial settings cannot be accessed while program mode is on
("P” is displayed, «*■ page 23).
Press [PROGRAM] to turn the mode off.
• The initial settings cannot be accessed while CD MANAGER
(■» page 25) is on. Press [CD MANAGER] to select “NORMAL”.
I
I
o
■G
.£
CE3 ►
RQT5327