Sat t, Recording js in progress), Recording is not in progress) – Panasonic PVQ-M2508 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cancel a Timer Recording:
(Recording js in progress)
Hold down STOP for a few seconds to cancel the Timer
Recording.
• Any future daily or weekly recordings will be performed as
programmed.
STOP/ PROGRAM TIMER
EJECT Indicator
Replace Program Contents:
(Recording is not in progress)
1
Do step 1 on previous page. All
currently set programs will be
displayed on-screen.
2
Press AT repeatedly to
select the desired program, and
then press ► to display the
settings. (See page 18.)
3
Press AT repeatedly to
select, and then press
► to enter replacement
information.
P DT START STOP
□ - -: -:
CH SPD
2 8 10:00p12:00p125
SP
3 10 8:00p 9:00p
10
SP
4 SU 9:00p10:00p
L
LP
SELECT 1-8;* ▼ KEY
ENTER :»> KEY
END :PROG KEY
b
X
ts
I/
start
stop
CH
a
8
SAT t
0
:
00
P
12
:
00
P
10
TOBXTN
CATEGORY:SPORTS
SELECT:* ▼ KEY
SET :■* ► KEY
END :PROG KEY
CBS
SP
Press PROG twice to exit this
mode and return to the normal TV screen.
Review or Clear Program Contents:
(Recording is not in progress)
a
Do step 1 on previous page. All
currently set programs will be
displayed on-screen.
b
Press
AT
repeatedly to select the
desired program number.
C Press the ADD/DLT if you want to
clear the program.
d
Press PROG to exit this mode and
return to the normal TV screen.
P DT START STOP CH SPD
2
a 10:00p12:00p125 SP
3 10
8;00p 9:00p 10 SP
4 SU 9:00p10:00p L LP
CANCEL:ADD/DLT KEY
SELECT 1-B:* ▼ KEY
ENTER :► KEY
END :PROG KEY
P DT
□ --
START STOP
CH SPD
2 8
10:00p12:00p125
SP
3 10
0:OOp 9:O0p
10
SP
4 SU
9:00p10:00p
L
LP
SELECT 1-8:* ▼ KEY
ENTER :► KEY
END
:PROG KEY
If “PLEASE PREPARE FOR TIMER REC” appears and/or the PROGRAM TIMER indicator flashes,
check that a cassette with record tab is loaded and the Combination VCR is in Stop mode.
If the start times of two programs overlap, the lower numbered program will have priority.
If the start time for a timer recording comes up during a normal recording or One Touch Recording
(page 16), the timer recording will not be performed.
If there is a power interruption of more than one minute, the recording may not be performed or
continue.
If “INCOMPLETE" appears after all items have been set, check ail entries and make necessary
corrections.
19