Panasonic KX-TD7895 - Manual (Page 6)

L@©S! u [M) @P ©aMMlS iiMs) ©SJMlgiM)®
B ase U nit
n Connect as shown.
□ Raise the antenna.
LOCATOR Button
Used to locate the handset.
Fasten the AC Adaptor
cord to the cord holder.
DIALING MODE Selector-
On | SLT [mode:
If your telephone line provides
touch tone service, set to TONE .
If your telephone line provides
rotary service, set to PULSE .
CONNECTION MODE Selector
If the base unit is connected to a Telephone
Line Jack or a PBX (except for Panasonic
KX-T, KX-TA or KX-TD series), set to
SLT.
If the base unit is connected to Panasonic
KX-T, KX-TA or KX-TD series, set to
EMSS .
To AC Outlet
(120 VAC, 60 Hz)
AC Adaptor
(PQLVI)
ih
To Telephone
Line Jack (RJ14C) Telephone Line Cord
or PBX.
THE AC ADAPTOR IS USED AS THE MAIN DISCONNECT DEVICE,
ENSURE THAT THE SOCKET-OUTLET IS LOCATED/INSTALLED
NEAR THE EQUIPMENT AND IS EASILY ACCESSIBLE.
N ote :
Use ONLY Panasonic AC Adaptor PQLVL The adaptor must remain connected
at all times.
The AC adaptor may feel warm. This is normal.
The unit will not function during a power failure.
EMSS|:This unit cannot be connected in parallel with a single line telephone.