Niwia – Panasonic SC-AK25 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Connections

For Australia and NewZealand

For others

FM outdoor antenna :

(not included)

For Australia and NewZealand

AM outdoor antenna

(not included)

For others

(included)

AM outdoor antenna

(not included)

(included)

You may need an outdoor antenna if you use this system in a moun­

tainous region or inside a reinforced-concrete building, etc.

FM outdoor antermo ^

Disconnect the FM indoor antenna if an FM outdoor antenna is in­
stalled.

© Remove a piece of the outer vinyl insulator,

d) Twist the shield braid.

(a) Expose the core wire.

Fori'AustraliamndtNewZealand.:

The configuration of FM Antenna terminal is different.

An outdoor antenna should be installed by a qualified technician

only.

AM outdoor antenna Eü

Connect the outdoor antenna without removing the AM loop anten­

na. Run 5 to 12 m of vinyi-covered wire horizontally along a window

or other convenient location.

niwia

When the unit is not in use, disconnect the outdoor antenna to pre­

vent possible damage that may be caused by lightning. Never use

an outdoor antenna during an electrical storm.

.......................

ш

®For details, refer to the instruction manual of the units which are to

be connected.

•This example shows how to connect an analog player with the

PHONO OUT/LINE OUT switch.

•When units other than those described below are to be connected,

please consult with your audio dealer.

•Only an analog player with a built-in phono equalizer can be con­

nected.

•Set the switch to the "LINE OUT” position at the back of the analog

player.

Advertising