Panasonic RX-FT530 - Manual (Page 9)

Recording from deck 1 to deck 2 Q
When PAUSE and ig«Mw;iB of deck 2 are pressed, tape
recording starts by pressing the deck 1 playback button.
(Synchro-start function)
E
Set SELECTOR to TAPE/SS.
TjwBBl Hmo @[fl«
Insert the playback tape into
.| recording tape
Into deck 2.
3
a:
MK/i ttOMJtUikMHre
T1 Set EDITING to the desired posi­
tion.
“NORMAL": Normal speed
“HIGH”: High speed
II PAUSE
•liiamniB Press PAUSE of deck 2, then
^
RECORD
<J»LAY
□
Press PLAY of deck 1.
Recording is started by means of the
Synchro-start function.
To stop recording:
Press STOP/EJECT (deck 1 and deck 2).
■Do not change the tape speed during recording. The play­
back sound may flutter.
•Be sure to set SELECTOR to TAPE/ SID during record­
ing. Do not change it to any other position.
•If the unit is brought near a TV set during recording, noise
may be recorded due to the effects of the signals from the
TV set. Maintain a distance of at least 1.5 meters between
the unit and a TV set.
Erasure of tape ______________________________
When recording, previously recorded signals on the tape
will be erased automatically.
(Make no connections to the }CDI /LINE iN jacks.)
1. Set SELECTOR to ICDI /LINE.
2. Press! RECORD
Recording from external equipment
J Connect the output of the external equip-
^ ment toICDi /LINE IN jacks. (Refer to page 4.)
2 Set SELECTOR to [CQ/LINE, and insert the
^ recording tape into deck 2.
Press PAUSE of deck 2, then press RECORD
^ Start playing the external equipment (ex.
^ portable CD player).
Release PAUSE.