Panasonic CT-20G12 - Manual (Page 19)

Set-Up Features
Set Time
Clock (when set) will display on screen at initial ‘Turn On”,
after a channel change and when pressing the RECALL
button. The time must be set first in order to operate the
Program ON/OFF Timer.
NOTE: This feature will be disabled when Auto Power
On is activated.
O
1. Press action ,
2. Press ^or^ and or ^ to highlight the Set-Up
Icon.
O
3. Press
action
to display the Set-Up Menu.
rSET=URi
SGSEES
m?
ESPANOL^RRANCAIS
iSETiOR]
ESPANOL^II^ANCAIS
4. Press ^ to highlight ANT.
5. Press or ^ to select TV or CABLE.
NOTE: This feature is disabled when Game Guard
Lock is activated.
O
6. Press
action
twice to exit menus.
Auto Prog
This feature allows you to place all channels with a video
signal into Channel Scan Memory.
O
1. Press
action
2. Press ^ orW and or ^ to highlight the Set-Up
Icon.
O
3. Press
action
to display the Set-Up Menu.
4. Press'^ or^ to set hours (set AM/PM accordingly).
5. Press ^ to select minutes position.
6. Press or repeatedly to set minutes.
7. Press
action
twice to exit menus.
Antenna (Ant)
The proper Input mode must be selected for the type of
signal at the antenna input.
• TV mode is used when the Receiver is not connected to
a cable TV system, for example when using a VHF/UHF
antenna (channels 02 - 69).
• Cable mode is used when the Receiver is connected to
a Cable TV system and you are not using a cable
company converter box (channels 01 - 125).
CD
1. Press
action ,
2. Press ^ orW and or ^ to highlight the Set-Up
Icon.
3. Press action to display the Set-Up Menu.
iSETEURj
SETtTlME
ANTMH
AUTO PROG
MANUAIIRROG
AU.TOiROWER
_ SG9
1^
4. Press W to highlight AUTO PROG.
5. Press *^or^to start Auto Programming. Channels
will automatically advance until all channels have
been scanned.
NOTE: This feature is disabled when Game Guard
Lock is activated.
CD
6. Press
action
twice after completion of Auto
Programming to exit menus.
NOTE: Channel numbers with signal present will turn blue
which indicates stored in Channel Scan Memory.
-
19
-