How to use – Panasonic EW1000 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO USE
This high-speed, vibrating, electric toothbrush is different from conventional
electric toothbrushes. Therefore:
• You only need to lightly press the bristles against your teeth for brushing,
• When first using this product, some people experience a tickling or
tingling sensation caused by the high-speed vibrations,
The sensation should subside after you use the toothbrush several more
times.
1. Place the brush head firmly onto the
toothbrush shaft.
• There is a small space between
the brush and the main unit. This
is normal and is necessary for the
head to vibrate properly.
4. When you have
finished brushing,
press the on/off button
to turn off the power.
• To prevent foam from
spattering, turn the
toothbrush off before
removing it from your mouth.
2. Apply toothpaste to the toothbrush. Then
place the toothbrush in your mouth before
turning the power on to prevent the tooth
paste from spattering.
3. Press the on/off button for at least
1 second to turn on the toothbrush.
• When the toothbrush first starts,
the “gentle-starf function causes it
take about 2 seconds to reach its
normal speed.
Brushing duration notification timer
The toothbrush stops temporarily after 2 minutes of use, and starts again.
This reminds you that you should brush your teeth for about 2 minutes.
PRECAUTION:
You may experience bleeding of the gums for the first 2 or 3 days of using
this toothbrush, but such bleeding should stop. If the bleeding persists for
more than a week, stop using this toothbrush and consult your dentist.