Panasonic TC-25V50H EN - Manual (Page 14)

Tuning Procedure
How to Tune In Your TV Set
(Automatic Search)
1. The TV set must be turned on.
2. Press the "PRE." button until the on-screen
display appears as follows :
PRE.
Programme
Number
(0-59)
Sound System
Colour
System
1
SEARCH V l -
4.5MH2
AUTO
. Band
Indicator
V l ; VHF Low Band
V h :VHF High Band
U :UHF Band
Figure 1.
3. Press the "FUNCTION” button ,
The on-screen display appears
as shown :
FUNC.
--------------------------------\
0 SEARCH V l
4.5MHz
AUTO
MONO SURROUND
Searching Completion
The best tuning position is automatically
memorized.
4. Press the "PRE." button twice to return the
TV set to the normal operating mode.
A maximum of 60 Programme Numbers
(0-59) can be programmed.
Note:
When the colour or sound is not clear is
produced on a Programme Number,
Press the “SYSTEM I or r Button.
(Refer to page 17)
How to Tune in Your TV Set
( Manual Search )
1. The TV set must be turned on.
2, Press the "PRE." button until the on-screen
display appears as shown in Figure 1.
PRE.
3. Press either the Programme Number Up
“ a ” or Down “v" Button, to select the
Programme Number in which you wish to
store the desired broadcast transmission
channel tuning.
V A
4. Press either the Level Adjustment Up “ + ”
or Down “ - ” buttons, the TV station
broadcasting on the next higher or lower
frequency will be automatically tuned and
memorized.
1 SEARCH V l
4.5MHz
AUTO
Searching Completion
If an undesired TV station is received, press
the same button again until the desired TV
station is tuned.
5. Repeat step 3 and 4 to tune all the available
TV stations on the remaining channel.
Ensure that a new programme number is set
(step 2) before tuning the next station.
6. Press the "PRE." button twice to return the
TV set to the normal operating mode.
14