Panasonic KX-T2365A - Manual (Page 4)

Preparation
Connect as shown.
Handset Cord
To Telephone Line
RtNGER
OFF • • • HIGH
LOW
■ Do not use any handset other than Panasonic handset made for the model KX-T2365A.
O Ringer Volume Selector:
Set to “HIGH”.
LOW: The ringing sound level will be low.
OFF: The telephone will not ring.
O Dialing Mode Selector:
Set to “TONE”.
If dialing cannot be done,
set to "PULSE".
O Recall Selector:
Set to “E RE” or
“T BR”.
RECALL
------------- \
DIALING MODE
■ ► Œ
PULSE • • TONE
V_____
J
E RE T BR
Dialing mode
selector
Recall
Selector
Ringer Volume
Selector
(depending on PBX type)
E RE ... for PBX earth recall facility
T BR ... for PBX timed break register
recall facility
O Insert the batteries (included) in the
proper order as indicated.
For further details, see page 13.
O Select the LC Displays’ contrast.
I /»«OG I -X.
Push -----------------^ -----------
----------------- .. f------------------- .. àttuofty
5 or
[JJ ^
□
to choose the best display intensity.
[T] : Low intensity
[ 2 ] : Middle intensity
[ 3 ] : High intensity
• Push the Program Button until the LC
Display shows _
Q Adjust the time.
The LC Display will blink when *
first powered on. For further
details, see page 11.
------------------------------------------------------------- ^
Replace all the batteries every 10
^months, or misoperation may occur.^
U the batteries are not installed, ^
programming, and speakerphone
operation can not be done. ^
Do not use rechargeable (Nickel-
Cadmium) batteries.
j
-
3
-