Connecting cpa to macintosh – Panasonic KX-RC22 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Connecting CPA to Macintosh
3
,
Plug the interface cable of the interface adaptor into the interface
connector of the CPA. Be sure to plug the cable in securely.
4
.
Connect a Macintosh to Modem cable
(serial cable)
to the interface
adaptor and to Modem port or Printer port of the Macintosh.
(To set the port, see p. 17.)
Interface adaptor
Interface connector
Macintosh
Printer port
Macintosh to Modem cable
(serial cable)
O
o
3
o
(Q
O
2
0
1
2
5‘
5
tn
3-
5
,
Turn on the Macintosh, the interface adaptor, and then the CPA.
When turning it off, follow the above procedure in reverse order.
13
Advertising