Compex Systems WPE54G - Manual (Page 10)

Chapter 4 TCP/IP Configuration
8
4: TCP/IP Configuration
Once the hardware has been set up, you need to assign an IP address to your
PC so that it will be in the same subnet as Compex WPE54G. By default,
Compex WPE54G’s IP address is 192.168.168.1; and its subnet mask is
255.255.255.0. You need to configure your PC’s IP address to 192.168.168.X; and
its subnet mask is 255.255.255.0, where X can be any number from 2 to 254
excluding 1. Simply follow the procedures stated below to configure the TCP/IP
settings of your PC.
For Windows 95/98/98SE/ME/NT
Please note the following instructions are based on Windows 98.
From your desktop, choose Network Neighborhood icon and select Properties.
Choose the network adapter that you are using; right click and select
Properties.
Highlight the TCP/IP and click on
Properties button.