Panasonic Ultra Pro MC-V300 - Manual (Page 13)

CHANGING THE DUSTIBAG
Always operate the vacuum with a genuine Panasonic Type U3 Standard or U6
Electrostatic dust bag installed. Panasonic dust bags may be ordered through any
authorized Panasonic dealer. An optional cloth bag is available.
1. Press the release
button located on the
top of the bag cover.
Pull the bag cover
forward. Remove
and lay aside.
2. To remove the dust
bag, grasp the cardboard
portion of the dust bag and
pull it out.
3. Spread out the end
of the new dust bag.
NOTE: Pull carefully so
as not to tear the bag at
the folds.
4. Attach the new dust bag onto
the bag holder by holding the
cardboard portion and push­
ing back as iilustrated.
5. Reinsert the tab
provided on the
end of the dust
cover into
the groove
on the dust
compart­
ment to
allow the
cover to
rotate closed.
Cover
Body
Positioning
Slot
Bag Cover
Positioning Tab
NOTE: The dust cover must be
completely and correctly installed
for proper operation.
6. Rotate
the dust
cover up into
the closed
position and
press into place.
NOTE: The dust bag
should not be caught
between the
lower edge of
the dust cover
and the gasket
as indicated by
the arrow in the
iiiustration.
-
13
-