4 press code + correct, Making manual corrections – Panasonic KX-E2000 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
—
CODE
Making Manual Corrections
Manual correction is ideal for correcting one or two errors
outside of the correction memory.
1
Press CODE + CORRECT to advance beyond the correction
CORRECT
The printer will automatically move to the left margin
2
Press REVERSE INDEX
(T)
to position the printer on the line
containing the error
3
SPACE
to position the printer directly over the error
4
Press CODE + CORRECT
5
Retype the incorrect character
This will lift the character off the paper.
6
Type the correct character
7
Repeat the steps outlined above for each incorrect character on
the same line
8 Press RELOC
This repositions the printer at the last printed character or
RETURN.
NOTE:
If you have multiple corrections to make on different lines, you
must RETURN to position the printer at the left margin in order
to REVERSE INDEX
(T)
to the next line containing the error.
18