Power-saving mode – Panasonic CF-VDD721 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4
Move the cursor to the line containing “
OAKCDROM.SYS*” and delete
the characters “rem” at the beginning of the line. (Deleting “rem” causes the item to
become valid.)
DEV1CEHIGH=C;\WINDOWS\COMMAND\OAKCDROM.SYS*/D;MSCDOOO
(If this line is missing, add it.)
* CmmtffaTRgR): ATAPICD.SYS
5
Press[
Alt
] + C
F
) . thenC
S
) to save the file. Then press C
Alt
) + (
F
) . then
CD
to
exit the Edit program.
6
Follow the same steps to edit the “AUTOEXEC.BAT” file,
edit autoexec.bat f
Enter
)
7 Move the cursor to the line containing “MSCDEX.EXE” and delete the characters “rem”
at the beginning of the line. (Deleting “rem” causes the item to become valid.)
LOADHIGH C:\WlNDOWS\COMMANDVMSCDEX.EXE /DiMSCDOOO /L:L
(If this line is missing, add it.)
3
Press
( Alt ) +CE)
, then to save the file. Then press
CM) +CD
, then
CD
to
exit the Edit program.
9
Restart the computer.
Power-saving Mode
If the DVD-ROM Drive Pack has not been accessed within 90 seconds, the drive motor will
automatically shut down to reduce the power consumption. When the DVD-ROM Drive
Pack is accessed once again, the power of the drive motor is turned on. However, approxi
mately 30 seconds are required until data is actually read from the disc.