F| press ■ stop to select the cd mode, Q press -!-/►►! or —/!◄◄ to select desired track, Q press »memory to record the selection – Panasonic RX-ED77 User Manual

Page 16: Pi continue programming by repeating steps 2 and 3, G press ►/bi play/pause, To cancel program play, When “ : ” is displayed, When “full” is displayed, To check programming, Memory retention of programmed tracks

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Listening to

CDs

m

B

O)

.S

s

£

Total play time of programmed track

(pirbgram play];

Up to 36 tracks can be programmed.

(Only from the main unit)

|f| Press ■ STOP to select the CD mode.

When IRANDOMI is displayed, press RANDOM on the remote
control to clear the display.

Q Press -!-/►►! or —/!◄◄ to select desired track.

Q Press »MEMORY to record the selection.

PI Continue programming by repeating steps 2

and 3.

g Press ►/BI PLAY/PAUSE.

Selected tracks play in tlie programmed sequence, and play
automatically stops.

To cancel program play:

(From the main unit)
Keep the »MEMORY/ »CLEAR pressed when CD is in stop mode
until "CLEAR" is displayed.
(From the remote control)

Press ■/CLEAR when CD is in stop mode to display "CLEAR".
Program play can also be cleared by pressing ^ CD OPEN/CLOSE.

When “---- :----- ” is displayed:

Total play time of the programmed tracks exceeds 120 minutes.

When “FULL” Is displayed:

36 tracks have already been programmed. No further tracks can be
programmed.

To check programming;

Press A / ►>{ or V / w h e n CD is in stop mode.
The track number and its play sequence can be checked eadr time

these buttons are pressed.

Memory retention of programmed tracks:

Track programming is retained even if play is stopped or the unit is

turned off.
A displayed "P" indicates that programming is retained in the mem­
ory. H

Advertising