Panasonic CT-36SF24 - Manual (Page 12)

Location of Controls for the Illuminated Home Theater Remote Control
Basic Remote Control Functions
For Television Operation
The following is an overview of the Remote Control unit for television
of^ation. Ensure the TV mode is selected by initially pressing
Please refer to the indicated pages for additional information.
Multi Button
Programmable to operate up to six
Remote Function buttons simulta­
neously.
Power Button
Press to turn the TV ON or OFF.
Mode Selection Buttons
Select the operation mode for the
remote control.
Volume Buttons
Press to adjust TV sound level. Use
writh Channel buttons to navigate in’
menus.
r0- Q
I O 0 0 I
•^1
POWERTli
Numeric Keypad (“0 through 9'’ Buttons)
Press desired channel number to randomly
access any channel.
TV/Video Button
Press to select TV or one of various Video
_ Inputs, for the Main Picture or the PIP
frame (when the PIP frame is displayed).
Mute Button
Press to mute sound. A second press
resumes sound.
Action Button
Press to display Main Menu and
enter or exit On Screen feature and
Adjustment Menus.
R-Tune (Rapid Tune) Button
Press to switch to the previously
viewed channel.
PIP Move Button
Press to position PIP frame to any
comer of the Main Picture (when PIP
frame is displayed).
PIP Freeze Button
Press to stop action in the Main Picture
or PIP frame (when the PIP frame is
displayed).
PIP Size Button
Press to selecit size of PIP frame
(when the PIP frame is displayed).
To prolong the life of the
batteries, the illumination of the
keys can be toggled ON and
OFF by pressing the R-TUNE
and
the RECALL buttons
simultaneously.
.... .. .s . ■ ..
rr^'
MOVE SIZE RP
...r:...i.GS>l
Channel Buttons
■Press to select channels. Use with
Volume buttons to navigate in menus.
Recall Button
Press to display Time, status of Sleep
Timer, Channel, Video McxJe, Channel
Caption (Station Identifier) and Audio
Mode.
PIP (Picture In Picture) Button
Press to display the PIP frame, press again
to remove PIP frame.
PIP Swap Button
Press to interchange PIP frame with Main
Picture (when the PIP frame is displayed).
VCR Function Buttons
Programmable to operate many brands of
VCRs.
VCR/DSS Channel Buttons
Select VCR or DSS Up/Down channels.
Home Theater Remote Control
EUR511060A
Helpful Hints:
If the selected component does not respond to the remote control,
ensure that the proper mode is selected. First, press the Mode
Selection Button that corresponds to that component. For example,
after first pressing the TV Mode Button, the remote will remain In the
TV mode for the following commands. If a different mode button is
pressed white operating the tetevision, the TV mode button must be
pressed again to enable the TV mode control.
- 1 2 -
NOTE:
For additional information on the Remote
Control, please refer to the Remote Control
Quick Reference Functional Key Chart.