Pip operation with a vcr - no cabie box, Procedure, Pip operation with a vcr - no cable box – Panasonic PT-51G43 User Manual
Page 9: Pip) o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
icture
I
n
P
icture
(PIP) O
peration
PIP Operation with a VCR - No Cabie Box
This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is
required to provide a second picture.
Connect your television to a VCR, as shown.
TERMINALS ON BACK OF TV
VCR
Note:
The Remote Control must be programmed with the supplied codes to operate the
VCR. See Programming the Remote Control in the
Remote Control Quick
Reference Guide.
Procedure
Turn the VCR OFF and tune the PTV to channel 3.
Press the
PIP
button on the Remote Control to display the PIP frame on screen.
Note:
The PIP picture is the same as the Main picture, initially.
•
Press the
TVA^IDEO
button on the Remote Control to select the VIDEO PIP
source.
•
Press the
VCR
button on the Remote Control and turn ON the VCR.
•
Press the
TV/VCR
button on the Remote Control.
•
Choose channels for P/Pframe by pressing
VCR CHANNEL
up/down buttons on
the Remote Control.
•
Choose channels for the Main Picture by pressing the
TV
button on the Remote
Control and using the numeric keypad or
CH
up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.
m