Panasonic 2-LINE PLAIN PAPER FAX KX-FPW111 - Manual (Page 26)

Setup
To connect two single-line telephone jacks (RJ11C)
A. Connect the 2-wire telephone line cord
with TRANSPARENT plugs to L2 jack on
the unit and connect to a single line
telephone jack {RJ11C).
B. Connect the 4-wire telephone line cord
with GREEN plugs to L1/L2 jack on the
unit and connect to a single line telephone
jack(RJHC).
Single line
LINE 1
telephone jack
(RJ11C)
0 - o-
4-wire telephone
line cord with
GREEN plugs
Line surge \
protector /
Single line
telephone jack
(RJ11C)
LINE 2
0
Ferrite core
(For the fax
machine)
- O -
GREEN plug
(
Line surge \
protector / 2-wire telephone
line cord with
TRANSPARENT
plugs
Stopper
TRANSPARENT plug
Remove the stopper with your
finger before connecting the
cord to the L2 jack.
• If you connect the unit to a private branch exchange, connect as follows:
A. Connect the 4-wire telephone line cord to “L2” jack
B. Connect the 2-wire telephone line cord to “L1/L2” jack.
If you use the unit only as a single-line telephone/facsimile
A.
B.
Connect the 2-wire telephone line cord
with TRANSPARENT plugs to L1/L2 jack
on the unit.
Connect to a single line telephone jack
(RJ11C).
Single line
telephone jack
(RJ11C)
c?
( Line surge \
protector /
2-wire telephone
line cord with
TRANSPARENT
plugs
A ---------------
TRANSPARENT plug
Note:
• If you use the unit as a single-tine telephone/facsimile, set the line usage selection (p. 34).
26