Recording from cds (only deck – Panasonic RX-DT39 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I

STOP/EJECT

TAPBfSHlTW

nin

SELECTOR

± CD EJECT

■r'

,n -

u O fu ^

—r

Recording from CDs (Only deck

I

)

Reccrding and CD piay auiomaticaily begin simultaneously.

Press

deck

1

STOP/EJECT]

and

load

the

tape.

Load the tape with the side to be recorded facing upward.

Set [SELECTOR] to “CD”.

M

Press CD EJECT] and insert the CD.

Make sure the total piay time is displayed before proceeding to

the next step.

Press

to start recording.

PLAY] is also depressed with [® ial^].

CD play starts simultaneously.

To stop the recording:

Press p/^ STOP/EJECT],
(CD does not stop.)

To pause recording:

Press [IB PAUSE],

(CD does not stop.)

To resume recording, press p PAUSE] again.

Recordists tevoairit© Crocks

1. Program desired tracks (refer to steps ^ to O on page 12) after

step ii.

2. Press [®

] to start recording.

PLAY] is also depressed with EH].

e When CD play is finished:

CD automatically stops (the cassette keeps recording).

6) When the tapes reaches to the end:

Recording stops but CD keeps playing (the track may be inter-

iTjpted).

To continue recording on the other side of the tape, remove the

tape, turn it around, install it again, and start recording once more.

To contimie recording a different CD on the same cassette:

© When recording of first CD is finished, press p/± STOP/EJECT]

to stop the tape.

® Replace the CD and display the play time.
(D Press [® 05^1 to start recording.

@ When recording of second CD is finished, press p/±; STOP/

EJECT] to stop the tape.

Advertising