Panasonic CQ VAD9300U User Manual

Page 97

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

El] CD

cz

Trouble

CD text is not
displayed normally.

3 C

Time is counted but no

sound comes out.

Cause/Step

D

I>

Disc is dirty, or has scratches.

Clean the disc, referring to the section on “Notes on Discs” page 103).

The 1st track of a mix mode disc was reproduced. (Mix mode is a format in
which data, except music, is recorded on the 1st track and music data is

recorded on other than the 1st track in a session.)
^Ptay back music data recorded on other than the 1st track.

□ MP3

dZ

Trouble

3 C

''

No playback.

It takes too tong for
playback to start.

Poor recording quality,

sound skipping

Fites are not played in

the desired order.

Folder/file name is not

displayed correctly.

Cause/Step

D

>

0

>

>

The disc does not conform to any of the file systems supported by this player.

^Insert a disc that conforms to the file systems supported by this player.

(<=> page 33).

The MP3 file is missing the “.mp3” file name extension.

^Make sure to add the “.mp3” extension to each MP3 file name.

The folders and files recorded on the disc are layered too much.

^As checking of files takes longer in this case, do not record any unneces­

sary folders or files other than MP3s on the disc.

(If there are many hierarchies of files and folders, it may take up to 150

seconds to start playback.)

■fThe recording quality differs depending on the encoding software used,

and on settings such as the bit rate. Set the bit rate within the range spec­
ified in the specifications chart (^ page 106).
It is recommended to set the bit rate to “128 kbps or more” and “Fixed”.

High-speed writing was executed when MP3 data was recorded on the disc.
^Decrease writing speed as low as possible.

Files or folders are not recorded in the desired playback order.

N^Some writing software lets you specify the recording order by adding a

prefix in the range of “01” - “99”, etc. to the file name. For details refer

to the user manual of your writing software.

The disc does not conform to the file systems supported by this player,

«^Insert a disc that conforms to the file systems supported by this player,

page 33).

B^There may be a problem with your writing software or CD recorder (CD-

R/RW drive). For details refer to the user manual of your writing software.

CQ-VAD9300U

97

Advertising