Removing the monitor stand – Panasonic SL70 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Observe the following instructions if the unit is to be used with the display
stand removed. Repeat this procedure in the reverse order if the display
stand is to be reattached.
1. Removing the monitor stand
Lay the screen down onto a soft object (cushion,etc.) to
avoid scratching.
[H Grasp the bottom of the display stand as indicated in the illustration.
I Apply pressure with your fingers to the area shown in the illustration
and lift the stand slightly in an upward direction.This will release the
lock.
Once the lock has been released,remove your fingers and
firmly lift upwards at an angle.
This will separate the stand from the main unit.
After the display stand has been rem oved, store It for future use.
2. Instailation
Place the unit on top of the computer to
be used or on a tabletop.
Store the display stand for future use.
- 8
-