Record a tv program – Panasonic PV-4760 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To
RECORD A TV PROGRAM
See “Preparing the VCR for Recording“ in Table of Contents on P.2 for all sections related to this operation.
Use one of the connections described on the separate "Basic Guide For VCR Connections".
1
2
i
4
Turn TV ON, select
Insert cassette with
Set INPUT SIGNAL
Set TAPE-SPEED
Channel 3 or 4 on the
accidental erasure
SELECTOR TO
SELECTOR to SP, LP
TV.
prevention tab in place.
TUNER.
or SLP.
POWER comes ON*.
Be sure that the VCR/TV
4 P.37 (TAPE SPEED)
(Set to match the VCR
Selector is set to VCR.
LINE
Channel 3/4 Switch.)
* If a cassette is already
t
-TUNER
in the VCR, you may
AUDIO
need to press the
iion
IMP! IT
POWER Button ON.
♦ P. 39 (TAB)
IF YOU WISH TO AVOID RECORDING UNWANTED MATERIAL
■ Press PAUSE/STILL Button to stop the tape temporarily.
* P. 37 (TO RFCOF.D)
Press this button again to release from pause mode, recording continues.
- 1 1 -