To assemble cleaner, Warning, Attaching handlèto vacuum cmeanèr – Panasonic MC-V5710 User Manual
Page 6: Attaching handle to vacuum cleaner, Usingthe cord hook
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO ASSEMBLE CLEANER
A
WARNING
Electrical Shock Hazard.
DO NOT plug Into electrical supply until assembly Is complete. Failure to do so could
result in electrical shock or injury.
ATTACHING HANDLÈTO VACUUM CMEANÈR
The vacuum cleaner main body and handle are packed separately.
1. The handle screw has
been installed for shipping
purposes. Please remove
the screw before inserting
the handle. Insert the
handle as shown in the
illustration.
2. Insert the
screw that you
have removed. Be
sure the screw is
tightened, but not
overtightened.
3. There is a recessed area between
the upper cord hook base and the
handle that is designed to secure the
power cord during vacuuming.
Always push the power cord
down Into this recessed area
to help keep the power cord from
hanging near the nozzle and
being damaged by the agitator.
4. Loosely wrap the power cord
around the quick
release cord hook
and the lower cord
retainer. Secure the
plug head to the cord by
pushing the power cord into
the retainer on the plug head.
Retainer
(Plug Head)
.
>vS.
«
USINGTHE CORD HOOK
"'i
►i'l.
,
■
1. The upper cord hook has a
quick-release action. To
reiease the power cord, rotate
the hook downward and the
complete power cord will drop
off the hook for immediate
use.
2. DO NOT unplug the power
cord by pulling on the cord.
Grasp the plug head and pull
to unplug the vacuum clean
er.
Return the hook to the
upright position before
attempting to rewind the
cord.
-
6
-