Panasonic TC-14ST15M - Manual (Page 4)

( General Operation )
1. Stand-by Button
6. TV/AV Selection
Button
3. Direct Programme
Number Selection
Buttons
8. Recall Button
9. Off-Timer Button
11. Normalization Button
Main Menu Selection
Button
5. Volume Up and Down Buttons
2. Programme Number Up
and Down Buttons
4. Two Digit Programme
Number Selection Button
7. Sound Mute Button
Position Buttons
10. Picture Menu Button
Note:
Use two "R6" size dry batteries
for Remote Control Transmitter
1 .
(!)
To Switch Power on/off
The TV set must be switched
on at the wali outlet and at the
Main power switch.
Press this button to turn the
TV set ON, from stand-by mode.
Press it again to turn off.
Note:
When in the stand - by condition, it is possibie
to turn the TV set on by pushing the Direct Programme
Number Selection button (0-9) or the Programme Number
Up and Down button.
2. V A
r
%
Programme Number Selection
Press the programme number Up
" A ” or down " V * Button to select
the next higher or lower
programme number.
3. Direct Programme Number Selection
(0-9)
e. g. To select programme number
"1", press the "r button.