Precautions – Panasonic WJ-PC10 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRECAUTIONS
Do not attempt to disassemble the unit. In order to
prevent electrical shock, do not remove screw or
covers. There are no user-serviceable parts inside.
Do refer all servicing to qualified service personnel.
Do not abuse the unit. Avoid striking, shaking, etc. it
could be damaged by improper handling or storage.
Do handle the unit with care.
Do not use strong or abrasive detergents when
cleaning the unit. Do use a dry cloth to clean the
unit when dirty. In case the dirty is hard to remove,
use mild detergent and wipe gently.
Do not expose the unit to water or moisture and do
not operate in wet area. Do take immediate action if
ever the unit does become wet. Turn the power off
and refer servicing to qualified service personnel.
Moisture can damage the unit and also create the
danger of electrical shock.
Do not use the unit in an extreme environment where
high temperature or high humidity exist. Use the unit
under
conditions
where
temperatures
are
within
14°F - 122°F (—10°C - +50°C), and humidity is
below 95*/..
• The input power source must be 12V DC. Connect
to a class 2 power supply only.
Caution:
To prevent fire or shock hazard, the UL listed
wire VW-1, style 1007 should be used for the
cable for 12VDC Input Terminal.
Important:
All
necessary
procedures
with
regard
to
install this unit should be made by qualified
service
personnel
or
system
installer
who
is
experienced
in
Panasonic
System
300
installation.
- 2 -