Before use, Parts identification, Charging – Panasonic ES765 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before use

This

Wet/Dry

shaver

can

be

used

for

wet

shaving

with

shaving

lather

or for dry shaving. You can use this
watertight

shaver

in

the

shower

and

clean

it

in

water.

Treat

yourself

to

wet lather

shaves for at least three

weeks

and

notice

the

difference.

Your

Panasonic

Wet/Dry

shaver

requires a little time to get used to
because

your

skin

and

beard

need

about a month to adjust to any new
shaving method.
Charge

the

shaver

for

at

least

8

hours

before

using

it

for

the

first

time or when it has not been in use
for more than six months.

Parts identification

(see fig. 1)

® Protective cap

d) System outer foil release but­

tons

© Foil frame

© System outer foil

© Inner blade

© Foil frame release button

© On/Off switch

© Switch lock button

® Recharge lamp

© Charge status lamp

® Trimmer

(D Trimmer handle

© Charging adaptor with auto­

matic voltage adjustment

© Wall mount

© Wood screws

How to use the wall mount

The

charging

adaptor

can

be

hung

on the wall using wood screws.

1.

Select an appropriate location on

the wall where the screws can go

in.

2.

Attach the wall mount to the wall

as

shown

with

the

wood

screws,

making sure that the arrow points
up.

3.

Slide

the

charging

adaptor

grooves into the wall mount until it
clicks in.

To

remove

the

charging

adaptor

from the wall mount, slide the adap­
tor upward.

Charging

(see fig. 2)

Place

the

charging

adaptor

upright

on a flat surface or mount it on a
wall.

Plug

the

adaptor

into

an

AC

outlet.

It

will

adjust

automatically

to

volt­

ages

between

100-120

and

220-

240V AC.

Do not recharge the shaver from the
SHAVERS

ONLY

outlet

(AC

220-

240V) which is usually in hotel bath­

rooms in European and Asian coun­

tries as it will damage the charging
adaptor and/or outlet.

In some areas, a special plug adap­

tor may be required.

Switch the shaver to the “O charge
position” and place it upright into the

charging

adaptor

with

the

switch

facing toward the front.

The charge status tamp will glow red
when the shaver is placed on a right
charging

position.

It

will

turn

to

green when the charging is complet­
ed (see fig. 2A).
You can fully charge the shaver in
one hour if the recharge lamp flash­
es red (see fig. 2B).

Advertising